Which convector is right for you?
Convection is a good one, likely to transition at the beginning and end of the heating season. Just put a convector in the room that needs more heat. What's up with one convector arrives and what important purchase criteria there are, you will find in the following list.
Performance
A convector is an electrical model that is specified in watts. Choose a power for the convector that corresponds to the size of the room to be heated. Typically, a room between 20 and 25 square meters requires about 2,5 kilowatts of power. For smaller and larger rooms you need a convector fan with lower or higher power. If your walls are well insulated, a slightly lower powered convector may be sufficient.
Size:
Also note the Dimensions of the convectors. DMost models are between 50 and 80 cm wide and 30 to 70 cm high. In terms of depth, you can choose between models between 10 and 15 cm.
number of rooms
Depending on whether you want to heat just one room or an entire apartment, you can buy just one or several Konrektors. You can save money by using several special offers buy together. However, if you also have central heating, you usually do not need a convector for every room. At cool In the evenings or in the mornings, convectors with a thermostat are recommended in bathrooms, living rooms and children's rooms. A decisive criterion is the lowest possible electrical heating consumption or convection consumption if you do not want to experience any nasty surprises on your electricity bill at the end of the year due to convection consumption.
heat settings
Electric convection heaters must the setting of several heating levels make possible. This allows you to choose how much heat is dissipated so the room doesn't get too hot. Convectors with fans also generate different amounts of heat and can often be set to different heating levels.
Can a convector also be used as the sole heating system?
Hello Robin Richter,
We really appreciate your comment and your interest in our convector comparison. Your thoughts fuel our pursuit of excellence!
Yes, a convector can be used as the sole heating system. It generates heat through convection by drawing in cold air, heating it up and then releasing it as warm air. However, in very cold temperatures, an additional heat source may be required to achieve the desired indoor comfort.
Greetings from the support team to Meßstetten.
What are the advantages of a convector compared to other heating systems?
Hello Iman,
Your commitment to our convector test & comparison is remarkable. Thank you for your valuable contribution and your opinion!
Good question! A convector offers some advantages over other heating systems. It quickly heats up the room as it captures the air, heats it and then releases it back into the room. This achieves an even and rapid heat distribution. Another advantage is that convectors usually have a compact design and therefore require little space. In addition, they are often equipped with thermostats that allow precise temperature control. Some models are also energy efficient and can help reduce heating bills.
A token of respect: Greetings from the support team to Haren (Ems).
How long does it take for the convector to reach the desired room temperature?
Hello Timo,
We really appreciate your comment and your interest in our convector test & comparison. Thank you!
The heating time of a convector depends on the size of the room and the power of the convector. As a rule, however, the desired room temperature should be reached in about 20-30 minutes. For larger rooms you may need a more powerful convector.
Best regards to Rhens.
support specialist