Plasma cutter STAHLWERK CUT 50 ST IGBT with 50 amps

4.1/5 - (51 reviews)
Our offer recommendation

The STAHLWERK CUT 50 ST IGBT plasma cutter is a powerful tool specially designed for use in the field of metal processing. With an output of 50 amps, it effortlessly cuts through metal plates up to 12 mm thick. The plasma cutter is easy to use and offers high precision when cutting materials such as steel, aluminum and stainless steel. The robust housing of the tool ensures a long service life and is ideal for professional use.

Instructions for using the STAHLWERK CUT 50 ST IGBT plasma cutter

  • Preparation:
  • – Make sure the cutting table or workpiece is stable and securely placed.

    – Check the condition of the cutting blade and replace it if necessary.

  • Power supply:
  • – Connect the device to a suitable power source and ensure that the voltage setting is correct.

  • Preparing the cutting unit:
  • – Attach the appropriate cutting knife to the cutting torch.

    – Adjust the cutting thickness according to the material.

  • Safety Precautions:
  • – Always wear appropriate protective clothing, including safety glasses and gloves.

    – Make sure there are no flammable materials near the cutting area.

  • To cut:
  • – Hold the cutting torch and start the power supply.

    – Move the cutting torch evenly over the workpiece to cut the desired shape.

    – Make sure that the distance between the cutting blade and the workpiece remains constant.

  • After cutting:
  • – Switch off the device and disconnect it from the power source.

    – Allow the cutting torch to cool down before putting it away or changing the cutting blade.

Technical details

Best recommendation
Plasma cutter STAHLWERK CUT 50 ST IGBT with 50 amps
Model Plasma cutter STAHLWERK CUT 50 ST IGBT with 50 amps
Brand Steel mill
The Best productscoreprice.com1,5Very good!
compressor connection 4 bar
Input current A 32
Dimensions 47 x 28 x 33 cm
compressed air as gas
cutting capacity 8
cutting current 30-50A
inverter system
air flow at least 100 l/min
frequency 50 / 60 Hz
Weight 6,6 kg.
Mains voltage 230 V
Max. cutting thickness 14 mm
  • good ratio between control range and cutting performance
  • especially easy
to offer to offer

Current tests and comparisons of new products in 2023/2024