- practical tube for easy application
- with a secure screw cap
- particularly heat-resistant
Questions and answers about McNett T2769 AquaSure Inflatable Boat Glue 28 ml tube
How much glue is in the McNett T2769 AquaSure tube?The McNett T2769 AquaSure tube contains 28 ml of adhesive.
How long does it last? until the inflatable boat glue McNett T2769 AquaSure 28 ml tube has dried?The glue dries completely in 8-12 hours.
How long does it take for the glue to fully cure?McNett T24 AquaSure Adhesive takes approximately 2769 hours to fully cure.
How do I use McNett T2769 AquaSure Inflatable Boat Adhesive?Apply the glue to dry and clean surfaces. Firmly press the areas to be repaired and allow to dry for at least 24 hours.
How do I use McNett T2769 AquaSure Inflatable Boat Glue 28ml Tube?McNett T2769 AquaSure 28ml Tube Inflatable Adhesive is used to repair small holes and tears in inflatable boats. First, the area to be repaired should be thoroughly cleaned and dried. Then the glue should be applied liberally to the damaged area and left to dry for at least 24 hours. It is important to ensure that the glue is completely dry before using the inflatable again.
What surfaces can this adhesive be used on?McNett T2769 AquaSure Inflatable Boat Adhesive is suitable for a variety of surfaces including rubber, neoprene, hypalon, nylon and vinyl. It can be used to repair holes, tears or seal seams on inflatable boats, waders, wetsuits and other outdoor gear.